Replacement footpegs for MC21

**Mon Sep 16, 2013 10:43 am » Post: #1 » Download Post**

Hi all,

MC21 track bike took a spill and the r/h foot-peg hanger is kaput. Gear lever is also pretty mashed but might be salvageable.

Haven't been able to find any MC21 replacements so was wondering if anyone knows what other model hangers/pegs would fit?

For example I've seen a set of cheap rearsets for an MC18 and thought they might fit?

Not too bothered whether I get rearsets or used OEMs, as long as they are functional.

Cheers....

Al.
_________________
Cheers....

Al

Bikes:
GPZ900
NC30
NSR250SE
RGV250 vj22

**Mon Sep 16, 2013 12:34 pm » Post: #2 » Download Post**

Hi Al

I put Tyga rear sets on mine along with the height adjusters. This brought the pegs too high up so I swapped them over and put the LHS height adjuster on the RHS and it lowered the pegs and moved them back a bit further. It is now really really comfy

http://www.photobucket.com/user/Mellorp/media/F3NSR/LHSRearSet_zpsca9f3747.jpg.html?sort=3&o=9

http://tyga-performance.com/site/product_info.php?cPath=72_1036_79_115&products_id=50

HTH

Phil M

**Mon Sep 16, 2013 12:49 pm » Post: #3 » Download Post**

Hey, that's a pretty good idea =]

I may pickup those adjusters for my tyga rearsets as well.

**Mon Sep 16, 2013 6:18 pm » Post: #4 » Download Post**

I THINK, the spacing is different on mc18 and mc21.
_________________
Proud Father of , 05 ktm 400exc supermoto 2018 honda crf rx supermoto

**Tue Sep 17, 2013 2:25 am » Post: #5 » Download Post**

Thanks for the replies.

Is anyone with an MC18 able to measure the foot peg mounting bolt spacing for me so I can see if they are compatible with the MC21?

Cheers....
_________________
Cheers....

Al

Bikes:
GPZ900
NC30
NSR250SE
RGV250 vj22

**Tue Sep 17, 2013 5:31 am » Post: #6 » Download Post**

Ignore this. They are different.

FYI pitch of foot peg mounting holes on frame are:
MC18 left 78 right 71.5
MC21 left 76.4 right 70
_________________
Cheers....

Al

Bikes:
GPZ900
NC30
NSR250SE
RGV250 vj22