Hi all,

I stumbled upon a pic of an NSR which has what appears to be a HRC branded clutch cover (or half cover as it seems to be). I was just wondering what the chances of acquiring one would be? I've never seen one on an NSR before so is it maybe off an early model RS250? (I don't really know all too much about the RS250s but weren't the early engines near identical to the NSR?).

The best resolution picture (and only picture) I have is this: https://i.imgur.com/SKysqvY.jpg

My stock Honda cover is cracked (and marked with the value of the engine unfortunately) and whilst the Tyga covers looks great, I'd like this cover for the HRC goodness and poser points!

Sorry can't help, but do remember a similar question before.
Found this post
http://www.nsr250.net/forums/viewtopic.php?t=13222&highlight=hrc+cover

It's not an HRC product.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

RS_BOTT wrote:Sorry can't help, but do remember a similar question before.
Found this post
http://www.nsr250.net/forums/viewtopic.php?t=13222&highlight=hrc+cover

That actually looks like the same bike... Red clutch cable and oil filler cap. But yeah, up close the quality is definitely not HRC spec like Andy confirmed. I was dubious about it being a HRC part from the get go. Thanks though! Tyga cover it is!

Hi guys !

I purchased this carbon cover in Japan several years ago

from a dealer jha
_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy