smaller front and larger rear sprockets

**Sun Mar 01, 2015 9:12 pm » Post: #1 » Download Post**

hi guys just a question without going crazy, if i went up 2 teeth on the rear would it accelerate quicker if i went 1 tooth down on the front and 2 up on the rear would that be to silly whats the verdict and what would be the best way to go. just the rear, both, or just the front regards to all a13bee.
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Mon Mar 02, 2015 12:18 am » Post: #2 » Download Post**

Start by dropping 1 tooth on the front as it will be the cheapest option, take the bike for a test ride and then if you feel you still need more acceleration than go up on the rear. Different size front sprockets can be difficult to find though.

**Mon Mar 02, 2015 12:21 am » Post: #3 » Download Post**

hi mtec thanks for reply any idea on where to get a front sprocket from i think its 15 tooth so will need a 14 wonder if andy down at gt would have any
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Mon Mar 02, 2015 12:35 am » Post: #4 » Download Post**

We can do you a 14T front, no problem at all. There's also quite a wide range of rears available for the MC16.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Mar 02, 2015 4:28 pm » Post: #5 » Download Post**

hi andy how much posted to me for my mc18 not mc16 dont no whether they are the same posted to tq4 6lb here at rainy paignton regards colin
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Mon Mar 02, 2015 5:09 pm » Post: #6 » Download Post**

Sorry, Colin... I was having a bit of a moment there, wasn't I?! Confused

Too late to check the price now (our suppliers close at 5pm), but I will get back to you tomorrow. Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Mar 02, 2015 7:21 pm » Post: #7 » Download Post**

cheers andy will be bringing the bike down in a couple or three months for a jetting and rolling road just having some pipes custom made so will need big steve or yourself to squeeze a little more out of her and yes about the front sprocket yes can you get me one please be intouch tomorrow might even give you a ring regards colin

**Tue Mar 03, 2015 2:51 pm » Post: #8 » Download Post**

sorry havnt rung andy you got the price of that front 14 sprocket for my mc18 with postage to me here in paignton regards colin