correct base gasket thickness

**Tue Mar 31, 2015 4:32 pm » Post: #1 » Download Post**

hi guys as it says what is the correct thickness of the base gasket for a nsr250 mc18 r2j please also does other models fit and are they the same thickness any help is appriciated.
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Tue Mar 31, 2015 9:12 pm » Post: #2 » Download Post**

0.5mm and they are all the same for all models.
_________________
If I have to take the carbs off once more...

**Thu Apr 02, 2015 10:21 am » Post: #3 » Download Post**

cheers steve just want to get everything before i bring it down have you got head gaskets for the mc18 barrels and head regards colin
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Thu Apr 02, 2015 10:38 am » Post: #4 » Download Post**

Head gaskets are still available, and are £14.33ea. In stock in Honda Europe, so best to pre-order them, as they could take up to a week to turn up.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Apr 02, 2015 11:31 am » Post: #5 » Download Post**

andy can you order me 2 head and two base gaskets please and can you tell steve i am on the case for the mc18 heads and barrels regards colin let me know andy
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Thu Apr 02, 2015 12:38 pm » Post: #6 » Download Post**

All ordered, Colin. Smile

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Apr 02, 2015 2:53 pm » Post: #7 » Download Post**

how do you want me to pay and are you sending them to me when they come regards colin PS thanks andy and we must meet soon and partake in a beer on me
_________________
nsr250r love the smell of 2 strokes
rd400c
ypvs350r

**Fri Apr 03, 2015 11:08 am » Post: #8 » Download Post**

When the parts come in, the best way will be to call Parts at GT and pay over the phone. Alternatively, I can take PayPal "gift" (no fees), and then square up the GT account with my PayPal debit card.

Whatever works for you, is good for us. Smile

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Apr 03, 2015 3:33 pm » Post: #9 » Download Post**

thanks for getting back to me andy if its ok with you when they come in i will book the bike in with steve to do the heads and barrels and pay for it all then if this is ok with you but can you let me know when they are in please regards colin PS thanks andy for all the help you give and do for me

**Fri Apr 03, 2015 4:48 pm » Post: #10 » Download Post**

No problem at all, Colin. Smile

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Apr 03, 2015 11:53 pm » Post: #11 » Download Post**

thanks andy much love my kindest regards colin