Now that you're totally confused...
Got new bodywork for my MC21, but they sent a MC28 upper (fine by me, I always liked them better, anyhow...). I didn't realize that the 21 and 28 windscreens are notably different, so have ordered one of those, and am waiting on it. The 21 cluster looks like it might interfere with the windscreen. The top of the cluster sticks up above the top edge of the fairing, where the fairing and windscreen are connected. Also, the up-down adjustability of the fairing mount bracket (the one on the front of the bike, not the upper "horns") is affected. What I mean is, when I loosen the two 12mm bolts to adjust the fairing position up and down, there is no adjustability. The headlight housing is pushing against the bottom of the fairing bracket.

Solutions? Do I need to source a 28 front fairing stay/ mount?
TIA
Jeff

28 & 21 front cowl stays are the same, at least I swapped my MC28 TYGA stay onto the MC21 the other day and it fits perfectly.

Not sure what else to suggest other than getting hold of the proper 21 fairing.

Hey Jeff-

Jump over to the classifieds and look at my 21 vs the 28 and the upper fairings are way different. The 28's seems to look more aggressive to me. I have picture of them side by side if you need it to compare just shoot me your email and I'll forward it to you.