Rothmans tank paint measurements Q (with photos)

**Fri Dec 01, 2006 7:23 am » Post: #1 » Download Post**

Guys i want the measurements of the rothmans paint scheme on the MC21 tank i have some photos attached showing with red arrows of the measurements i need.

who ever is kind enough to measure his rothmans tank and give me that specific distances i would be really happy. i tried to find out roughly from photos but is difficult.

Thanks a lot
James

**Fri Dec 01, 2006 9:47 am » Post: #2 » Download Post**

I can do mine but it's not the standard Rothmans scheme.

And I cant see any pics. Wink

_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Fri Dec 01, 2006 12:19 pm » Post: #3 » Download Post**

Mick

is it mesured correctly? if it is then i am ok with it.

from the photo it looks as its ok

James

**Fri Dec 01, 2006 12:29 pm » Post: #4 » Download Post**

OK what do you need measuring
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Fri Dec 01, 2006 2:07 pm » Post: #5 » Download Post**

Knowing the distance to seperate the blue paint cause mine is the red white tank that the seperation of red is higher, i need the measurement if you can please

James

**Fri Dec 01, 2006 5:54 pm » Post: #6 » Download Post**

Did you buy the correct decals, or are you going to paint the stripes?
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Fri Dec 01, 2006 10:10 pm » Post: #7 » Download Post**

demetris74 wrote:Knowing the distance to seperate the blue paint cause mine is the red white tank that the seperation of red is higher, i need the measurement if you can please

James

Can you explain a little better?
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Sun Dec 03, 2006 3:22 pm » Post: #8 » Download Post**

from the photos i send i want the distance from bottom of tank to lower blue, measurment round the edges and front check the photos i attached

thanks for the help

**Sun Dec 03, 2006 5:32 pm » Post: #9 » Download Post**

demetris74 wrote:from the photos i send i want the distance from bottom of tank to lower blue, measurment round the edges and front check the photos i attached

thanks for the help

I would if i could see any photos.
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Sun Dec 03, 2006 11:41 pm » Post: #10 » Download Post**

Try this Mick...

Measure the distance at the two arrows, then measure the thickness of each stripe. That should do it.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Dec 04, 2006 6:40 am » Post: #11 » Download Post**

Thanks Andy

Thats exactly what i need, i will add the stripes later, first of all i need the distanse as Andy showed. to seperate and paint the tank
Laughing

Thanks for the addition Andy i guess mine was not so clear.

James

**Mon Dec 04, 2006 9:01 am » Post: #12 » Download Post**

No worries I'll do it tonight when I get in for you.
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Mon Dec 04, 2006 9:36 am » Post: #13 » Download Post**

Thanks Mick

Apreciate it man, just give me the measurements on the sides rear of tank and front sides where the blue line starts. will paint the bluew and then add the stripes therefore give me measure starting from the lower blue under the stripes.

James

**Mon Dec 04, 2006 8:46 pm » Post: #14 » Download Post**

Right here we go.

From the bottom of the tank seam the bottom of the blue stripe is 125mm

The 1st stripe is 12mm

The 2 Golds and the Red are 8mm and the white gaps between are 5mm

(this is the nearest I could work out with the sh*t tape measure I was using)

Hope this helps.

Mick
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Tue Dec 05, 2006 6:12 am » Post: #15 » Download Post**

Thanks mick that will do i think

i don't mind accuaracy just to be close enough

Thanks again mate

James