Just got a mc21 not running and was wondering if when you turn the ignition on you should hear the valves/ servos doing self test etc? _________________ Eric
No. They should only move if they didn't "park" in the right spot. At least mine work like that on 2 different PGMs. _________________ james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm
The NSR doesn't do that, though as said above, it will drive them to the start position if they weren't there at shut down. Manually rotate them with the ignition off, and then switch on to see if they move. _________________ MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball
With the ignition off and a slight effort you should be able to move the servo. If not, take the cables off and make sure the PVs are not frozen. If the servo does not work you may have damaged the PGM. _________________ james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm
Thanks for the advice guys. I got the tank off and played with the servo everything seems to be working ok. till next tme, thanks _________________ Eric
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum