hi all
got myself a mc18 which im restoring, trouble is im getting no spark, i have found one of the pick up coils is knackered. has anyone got a spare set kicking around at the back of their garage if so i would appreciate a call or if you have any info on wheather any other models have a set that will fit my nsr
ta
steve
07919050777
sussex

You can also use the pick up coils from either a MC21 or '28 but the pick up leads need extending to reach the MC18 connector.
_________________
If I have to take the carbs off once more...

and you'll need to add the neutral switch lead

Hi Are you sure it's the pick up coil ,not just the lead to it thats nackerd ? Also where are you in Sussex ?

The lead to it can't effectively be replaced though, so it's a complete assembly replacement required.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

thanks for the help guys

hi howl im down in sunny worthing dodging oaps

Hi Eggy
If you pm me today with a phone number I could pop down to sunny Worthing and have a look, Andy was correct that you can not compleatly replace the cable but can solder on a new one and heat shrink it if there is a bit of original cable showing. I might have a spare set in the garage ,I'll take a look .

Hi I have found a set in the garage so if you have a lit garage I could pop down one evening and we could give them a try. Or next Sunday ?

thanks howl
but ive just managed to buy a brand new pair of mc21 pick ups which i will be putting on tomorrow, hopefully that will get me sparking !!!
steve

Hope you get it sorted,when you have give me a shout and we can go out on a ride as I'm trying to sort out some rides with the local 400Greybike lads.