MC18 Rear Shock

**Mon Jul 14, 2008 9:05 pm » Post: #1 » Download Post**

Does anyone know what other rear shock fits the MC18 to lift the rear of the bike or is there a jack-up kit available for it?

**Mon Jul 14, 2008 10:37 pm » Post: #2 » Download Post**

Make some F3 link plates. That'll raise the rear about 25mm and stiffen it up.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Jul 15, 2008 7:34 am » Post: #3 » Download Post**

Thanks Andy,

You don`t happen to have a drawing with dimensions on it for the F3 plates for the rear suspension, or does anybody else have one.

Thanks,
Daz. Confused

**Tue Jul 15, 2008 7:48 am » Post: #4 » Download Post**

It's in the technical resources section of the site.

http://tech.nsr-world.com/nsr/mc18/f3-rear-suspension/

**Thu Jul 17, 2008 7:45 pm » Post: #5 » Download Post**

Thanks Mick,
Just another annoying question. The drawing does`t have the dimensions for thickness off the plate and also the height, length and radius on the corners. Is the material also aluminium?

Thanks,
Daz.

**Thu Jul 17, 2008 8:12 pm » Post: #6 » Download Post**

A CBR 600 F3 will fit. Needs a little modification to the upper and lower bushings. there about 1 inch longer than the stock mc18 shock. I found an Ohlins F3 and put it on my mc18.
_________________

MC18 Rear Shock

MC18 Rear Shock

MC18 - F3 Plates

F3 plates for shock linkage