End can to reject or to not rejet

**Sat Apr 16, 2016 6:33 pm » Post: #1 » Download Post**

Hi guys
Just a quick one, if I was to put Tyga end cans onto my otherwise bog standard mc16 would I need to rejet.
Cheers
Daz
_________________
stink wheels forever.

**Sun Apr 17, 2016 7:32 pm » Post: #2 » Download Post**

The conservative stance is yes, check your jetting after any changes to your intake and exhaust.

**Sun Apr 17, 2016 8:32 pm » Post: #3 » Download Post**

Thank you.
I thought so but its always good to have another opinion.

Daz
_________________
stink wheels forever.

**Sun Apr 17, 2016 9:53 pm » Post: #4 » Download Post**

The MC16 is the least artificially restricted NSR (i.e. intentionally restricted by Honda/law), so in my opinion is the least likely to need adjustment with minor modifications. However, as there are no official "full power" settings from Honda for any of the NSR250s, I would still strongly recommend erring on the side of caution with any modification.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!