83504-KV3-830 any help with dimensions?

**Mon Apr 20, 2020 5:02 pm » Post: #1 » Download Post**

Hi All,

I wondered if you might be able to help me with this one...

I need to try and locate 83504-KV3-830 part 32 off slide I 2 (image enc.) The issue is that my bike did not come with it and there seems to be non available.

My question is would anyone mind and or be able to send me some close up images of the one off your bike and some dimensions so I can fettle something up?
I can have a rough guesstimate at it but it would be good to know for sure what the dims. are.

Thanks in advance for any help.

Max

**Mon Apr 20, 2020 5:22 pm » Post: #2 » Download Post**

Hi max, give me a day or two and I will try and have a measure up.

**Mon Apr 20, 2020 5:26 pm » Post: #3 » Download Post**

paul g wrote:Hi max, give me a day or two and I will try and have a measure up.

Cheers Paul, not going anywhere at the moment...

I assume it provides a brace part to the bottom of the tail unit at the rear, just below the tail light unit? Giving something for the tail unit to bolt together on.

**Mon Apr 20, 2020 6:26 pm » Post: #4 » Download Post**

Yeah, that ties the two seat panels together at the back, and then is a fixing point for the rear light cover.

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Apr 21, 2020 6:15 am » Post: #5 » Download Post**

Cheers Andy, thought so but good to have it confirmed.

I reckon there is a small pot in the previous owners shed that contains all these little impossible to find bits....like all the airbox screws and this tail unit brace!

**Tue Apr 21, 2020 3:38 pm » Post: #6 » Download Post**

Max wrote:
I reckon there is a small pot in the previous owners shed that contains all these little impossible to find bits....like all the airbox screws and this tail unit brace!

Undoubtedly! Or in the bottom of his toolbox!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Apr 27, 2020 5:18 am » Post: #7 » Download Post**

Andy wrote:Yeah, that ties the two seat panels together at the back, and then is a fixing point for the rear light cover.

Hi Andy
If you see one of these whilst on your flywheel virtual shopping trip in Japan please throw it in the basket, let me know and I will Paypal the money over to you in advance.

Cheers
Max

**Mon Apr 27, 2020 2:57 pm » Post: #8 » Download Post**

Sorry Max for takeing so long to get back to you. I have searched everywhere and I cannot find this bracket, I had bought a spare to replace the home made one on my bike and put it somewhere so safe I cant find it!

**Mon Apr 27, 2020 3:09 pm » Post: #9 » Download Post**

paul g wrote:Sorry Max for takeing so long to get back to you. I have searched everywhere and I cannot find this bracket, I had bought a spare to replace the home made one on my bike and put it somewhere so safe I cant find it!

No worries Paul, I made a boo boo as I need part 31 as well but did not know it...one (part 31) came up on Ebay yesterday but I thought I had it kicking around and it sold, doh!

I'll get some light plate out and get whittling!

Cheers