MC28 upper work on MC21?

**Thu Feb 19, 2004 6:54 pm » Post: #1 » Download Post**

Does anyone know if the MC28 upper is a direct bolt on for the MC21, or is it the case that some modification is needed, e.g., change fairing stay too? Thanks for any information.
-Jim
_________________
-Jim
'93 MC21

**Thu Feb 19, 2004 7:10 pm » Post: #2 » Download Post**

Jim,

I attached an MC28 upper onto my MC21 with no issues. Even matched up to the lowers just fine.

Thanks,
_________________
Charles Gallant

**Thu Feb 19, 2004 7:29 pm » Post: #3 » Download Post**

That's a pleasant surprise! Thanks Charles!
-Jim

**Tue Feb 24, 2004 2:35 am » Post: #4 » Download Post**

Hi, I am a newbie. I am also planning to put a stock MC28 upper on my 1992 MC21. Do I also need to buy a new MC28 headlight too or the MC21 headlight will fit? I have also seen people putting the mC28 tail on a MC21. I think Charles did that but I realized 28 and 21 have different mounting points. Does that mean that people just change the subframe too?
Thanks,
Steve

**Tue Feb 24, 2004 2:40 am » Post: #5 » Download Post**

Steve,

The headlights are the same. However, the wind screens are not.

As for the tail section. You can keep the same subframe, just need to make a couple little brackets that go from the lower subframe to frame mounts that allow you to attache the body to the bracket.

I know TYGA sends these brackets with their body work (if you ask for it), or you can just cut your own out of aluminum.

Thanks,
_________________
Charles Gallant

**Wed Feb 25, 2004 3:42 am » Post: #6 » Download Post**

Thanks for the info, Charles.
Steve