boring out carbs

**Fri Sep 29, 2006 6:35 pm » Post: #1 » Download Post**

am thinking of boring out a set of carbs how much can you go on 21 carbs ?

**Fri Sep 29, 2006 6:44 pm » Post: #2 » Download Post**

When you have more hole than carb you've gone too far Wink

_________________
If I have to take the carbs off once more...

**Fri Sep 29, 2006 6:46 pm » Post: #3 » Download Post**

like it

**Fri Sep 29, 2006 10:05 pm » Post: #4 » Download Post**

What happened to keeping it all standard? Rolling Eyes

_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

**Fri Sep 29, 2006 11:15 pm » Post: #5 » Download Post**

my mates not having them cases now so ill have em off you for a bit of a winter project to see if i can get 80+ bhp form a nsr motor Twisted Evil

i got 42 from a nsr125 motor so am going to see if a 250 motor is up to the job Exclamation

**Mon Oct 02, 2006 3:00 am » Post: #6 » Download Post**

The width of the slide will determine how wide you can go., but beware of the intermadiate power jet exit of you'll cut straight into the main chamber hole.

You can cut them quite high. Lift the slide right up until it stops and you'll see.

Keep the 'D' shape, and don't be afraid to get the epoxy out to fill all the holes. Andy will know what I mean quite soon.

**Mon Oct 02, 2006 12:20 pm » Post: #7 » Download Post**

Matt@TYGA wrote:
Keep the 'D' shape, and don't be afraid to get the epoxy out to fill all the holes. Andy will know what I mean quite soon.

Yeah yeah yeah... Rolling Eyes

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Oct 02, 2006 12:41 pm » Post: #8 » Download Post**

When I said to Andy that they'll be done on Tuesday, I didn't actually tell him which Tuesday Laughing

**Mon Oct 02, 2006 1:26 pm » Post: #9 » Download Post**

Yeah, I thought it was that Tuesday 2 years ago!!! Laughing

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Oct 03, 2006 1:44 am » Post: #10 » Download Post**

When's Suh-Teve coming? I'll give 'em to him on Tuesday. Wink

**Tue Oct 03, 2006 3:04 am » Post: #11 » Download Post**

He landed at 6am at Suvarnabhumi. I think he's on his way down in about 4 days.

Along with my carbs, you'll be needing to load him up with numerous parts for the F250 racer! Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Oct 03, 2006 3:33 am » Post: #12 » Download Post**

Prize of a night out with Andy at his expense for anyone that can correctly pronounce "Suvarnabhumi".

**Tue Oct 03, 2006 7:22 am » Post: #13 » Download Post**

I have arrived! Its hot just like it was the time before and the time before that... down to see you in a couple of days Matt.
_________________
If I have to take the carbs off once more...

**Tue Oct 03, 2006 7:37 am » Post: #14 » Download Post**

I'll hide under my stone when I see you.

**Tue Oct 03, 2006 7:39 am » Post: #15 » Download Post**

lol, would that be the stone just out side the go-go bar?
_________________
If I have to take the carbs off once more...