Er... amazing how much time on their hands some people have!
Yep, that's 2 NSR250 motors joined in parallel to sort of make a V4, in a GSX-R frame!
I'm sure there has to be a better way to do it, but fair play to him!
Should be a 90hp motor with stock engines, and an incredibly robust 120~125hp with standard delimited engines. Whether it works like that though, I'm not sure.
I would've thought a VFR750 frame would've been better? At least Honda, and at least styling along the right lines.
To bad it isn't in english. the VFR frame would be to narrow. _________________ james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm
Probably, but something along those lines has to be better than a GSX-R frame. Not sure how wide a VFR750 motor is, but 2 x NSR250 motors (less a little) can't be much different. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Considering all the working he is doing anyway, he should just make a proper frame. _________________ james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm
There's a local guy, English though , that takes H1 and/or H2 motors and makes 1000cc bikes out of them. He's quite good at it and I think he puts them back in the original bike.
Joel _________________ 1994 MC28 Rothman
TSR250 AC28M
is the guy called Appleyard and he did a kwak z2000 and other conquoctions in his house and featured in some bike mag and mcn.
imagine all that brains gone into building a nsr500 and sticking it in an gixer like that (sorry gixer lovers, never been my favourite model), maybe one too many track day offs, i suggest a new arai.
i've got a vincent engine i'm thinking of putting into a 89 yz250 frame...nice?
Not too keen on running the 2nd engine through the 1st crank! Talk about big bang... I would have tried to take the drive from the middle somehow, but these are obviously smart chaps so maybe not possible.
Have you seen the other page on the website joining two CR250 engines together?
That front wheel looks a bit tight against the bottom barrel . _________________ Harley Davidson is the worlds most efficient way to turn petrol into noise without the harmful side effect of horsepower.
Wow the things some people will attemp.. Ive often wondered how you could use a snomobile engine as there are many large displacement two strokes readily available..I dont think ive ever seen a bike with a CVT though.. It would be sick if it came on anywhere near as hard as some sleds ive been on. My last 600 twin had somewhere over 100HP tiny engine as well.. just no transmission
putting two 2 strokes together, its kinda been done with the suzuki RG 500 (rear tyre 83. hp @ 10000 rpm) used to have one and now i want one again.
Would be fun to make a nsr 250 x 2 square 4 but in a CBR 600 frame or even a nsr 300 x 2 square 4. _________________ Honda nc23 CBR400 AERO 1986, 1990 honda NC23 Tri-Arm, 1987VFR400 NC24 Rothmans Rep, NSR250 MC16 1987, CL250s 1983. Moto guzzi zigolo 110cc 1958. Fantic 50cc 1972. Suzuki Cobra Race bike 500cc 2t 1975 , GP125 1975. Triumph T110 1954. BSA Thunderbird 1955. Ariel VB 600 1952, 1990 MuZ 125 etz.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum