What you think? Is it a bit of sales patter or are these HRC

Carb's

Described as being set up and using HRC needles and jets and comes with a range of jets and needles too - any way of actually knowing? Somebody using OKshon is bidding on them







USD front end from a HRC RS250 which has been retro-fitted onto an NSR250. Top bridge is HRC RS250 and they recomend using a MC21 locking cyclinder with it. Wheel is also HRC Magtek for RS250, in good order and serviceable.





Here is the matching rear;




_________________
Resistance is futile!

If only I lived in Japan

not sure about the carbs. However the forks are odd? Never seen that box at the bottom of the forks? I know my 01 RS250 forks have an adjuster there, but nothing like a large box like the ones in the pics? Also, the top fork clamp would be questionable to me. HRC never put an ignition lock/tumbler on the RS so not sure why there would be a place to put one on these?

The swing arm looks NSR, as the RS was a right side drive. The swing arm in your picture is a left side drive.
_________________
Charles Gallant

okay, on the forks, after a close look, the box thing at the bottom may be a metal bracket that is attached to where the fender/mud guard attaches to. However the front calipers don't look like the RS calipers.
_________________
Charles Gallant

The rear end is NSR with a RS Magtek on it.

The boxes on the forks had me wondering
_________________
Resistance is futile!

the boxes actually just look like brackets and nothing more (but I could be wrong). Maybe some "I made them myself" brackets for a different mud gaurd then the stock RS one?
_________________
Charles Gallant

I think the way they've modded the top triple to take the NSR ignition switch is pretty trick!

The "boxes" on the bottom of the forks are definitely brackets for a different fender.

The calipers definitely aren't HRC. That's the same front-end as I have on mine, so I can be positive as I have HRC calipers.

There were no HRC carbs (not for the masses anyway) for the MC28. The do however look kitted. The red X-piece is an HRC item, and there is no reason not to believe they don't have/come with the HRC needles and jets etc., as it was a common HRC SS/SP kit. The bellmouths are after-market.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Are you looking or selling? If the price is right I may be intrested in the wheels.
_________________
1995 A kit TZ 250
1994 Rothmans NSR 300sp SOLD
1998 RM 250 freestyle/motorcross
1998 Meathanol burning CR 500 AF super retard/motorcross/sand dunes/play bike

this was a 1992 rs250r frontend.
Till 1991 it was a non USD, since 1993 they had the brembos.
_________________
nsr300se rs250r´05 ns-1rr