Sprocket specialists here in the US has just about everything and if they don't they can make it. Andy is right though things get really tight with a 16 but I've been running one for some time now with no problems. _________________ 1995 A kit TZ 250
1994 Rothmans NSR 300sp SOLD
1998 RM 250 freestyle/motorcross
1998 Meathanol burning CR 500 AF super retard/motorcross/sand dunes/play bike
Erm, 1/15th on top end (presuming your bike will pull it)?
It can't alter acceleration that much once you're going unless it gives (or takes) gears from you in vital places.
A bit more than 2 teeth off the rear, a bit less than 3. _________________ Please do not PM me technical questions, if you can't find it on the Forum start a thread
It's worth ringing them though, as they can get hold of stuff thats not on the web site. They can also machine sprockets to order. They made me a selection for racing, and they were very reasonably priced.
They are very friendly and helpful as well. _________________ Please visit my NSR race site
well gav can't get a 16t font sprocket and the smallest rear he can get is 41T, does any one know if the mc21 40T rear sprocket will fit on my mc18 r5k????
No, I think only a gold 38T Talon, but I can do 40T Renthals (for MC21 and MC18) if you like?
The Renthals are about £35 and some sizes are available in different colours. Colours can take up to 10 days though, as they are made to order -- silver is usually a couple of days. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
dunkenb wrote:well gav can't get a 16t front sprocket
"Can't get" as in "HRC have no stock" or as in "don't know what to order"? The 16t rear was certainly a listed and obtainable NSR250 HRC part last year, I got one
But a little birdie tells me an NS400 sprocket just needs machining down as it's too wide though a nice ally rear would be cheaper, more effective (and prettier) than aquiring and machining a NS400 front or paying whatever eye watering extortion HRC feel like charging for the NSR part. _________________ Please do not PM me technical questions, if you can't find it on the Forum start a thread
can't get as in whoever supplies him cant find em.
on jamies nsr site he says AFAM do a 16t front but i cant find one in the uk.
anybody seen em any where in the uk?
emailed B and C express but they haven't replied as yet.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum