Technically they are sealed, but they can be disassembled. The end of each can is "rolled" over so needs to be cut, or better still, machined off and then you can extract all the gubbins.
The baffle may need shortening very slighly for reassembly, and the tip can just be riveted back in place like a race can.
Personally I would get a length of straight-through baffle tube and make them "race" type silencers if I was going to those kind of lengths. Packing material can be souced from any good bike shop that does MX parts. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
I was wondering if you could cut away the front of the silencer, so a spacer could be put in where the gasket fits?
Then they could be cleaned anytime and it would look the same from the outside
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
