MC28 jetting

**Tue Jul 28, 2009 11:55 am » Post: #1 » Download Post**

I am in the process of carrying out a few mods to my MC28.
I am fitting a set of M-max pipes, boring out the carbs, as per max recommended (33.5mm). fitting hi flow air filters, and carbon reeds.
My experience of jetting is limited, so would appreciate any recommendations as to size of main jet etc, before I start the bike and have it seize on me.

Thanks

Jeff

**Tue Jul 28, 2009 2:05 pm » Post: #2 » Download Post**

Hello Jeff,

I don't allow jetting discussion in the public area. People are welcome to PM you with advice, but if you wish to discuss it in open you will need to join as a supporting member and post in the Setup area.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Jul 28, 2009 5:47 pm » Post: #3 » Download Post**

Drop me a line if somebody hasn't sent you info yet.

**Tue Jul 28, 2009 7:44 pm » Post: #4 » Download Post**

Normally I'd drop you a PM straight away, but once you're playing with the carb bores I have no idea what effect that has.
Make sure the person who's advice you follow does.....
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

Last edited by fontyyy on Tue Jul 28, 2009 9:36 pm; edited 1 time in total

**Tue Jul 28, 2009 7:57 pm » Post: #5 » Download Post**

I refuse to answer that as detailed information will reveal too much. Wink

**Wed Jul 29, 2009 5:12 am » Post: #6 » Download Post**

Any kind soul can PM me the info too?
many thanks

**Wed Jul 29, 2009 6:07 pm » Post: #7 » Download Post**

wahzai wrote:Any kind soul can PM me the info too?
many thanks

I'm thinking you need to be more specific with your bikes set-up. Smile

**Thu Jul 30, 2009 4:07 pm » Post: #8 » Download Post**

almost the same as Jeff. HRC jet kit carb, Dogfight can etc...
_________________
HONDA NSR250 PGM4 MC28

**Thu Jul 30, 2009 9:03 pm » Post: #9 » Download Post**

And that will be exactly why I don't allow specific jetting discussion in the public forum.

"almost the same as Jeff. HRC jet kit carb, Dogfight can etc..." is not the same is it, and could require extremely different settings. Rolling Eyes

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Jul 30, 2009 9:12 pm » Post: #10 » Download Post**

I'm going to go slap myself because I was thinking the same thing. Razz

**Thu Jul 30, 2009 9:27 pm » Post: #11 » Download Post**

apexxn wrote:
I'm going to go slap myself because I was thinking the same thing.

It's much more fun to get someone to do the slapping for you... said Max Mosely! Very Happy

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Jul 31, 2009 10:36 am » Post: #12 » Download Post**

wahzai wrote:almost the same as Jeff. HRC jet kit carb, Dogfight can etc...

You've got the jet kit, it would appear Jeff hasn't, that's quite a big difference!
HRC base settings are in the tuning section...
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

MC28 jetting

MC28 jetting

kind soul

Re: kind soul