NSR250.net Forums Logo: Honda NSR 250 Forums, Classifieds and Service Manual in English. Covering All Honda NSR 250 MC16, MC18, MC21 and MC28 models
NSR250.net Forums

#
 
#
 
Performance Engineering

  • NSR250 Forums Index ‹ NSR250R Discussion
  • Members Content
  • Members Garage
  • Subscription
  • Transactions
  • FAQ
  • Search
  • Register
  • Log in

Cackling between 5000 and 6500 rpm mc 16


Reply to topic   printer-friendly view
Page 1 of 1   Download Topic





Suretlaw

 
Posts: 6
Joined: 29 Jun 2012

Location: New Zealand
    Send private message View user's profile
    Reply with quote  

Cackling between 5000 and 6500 rpm mc 16

Tue Sep 04, 2012 9:38 am » Post: #1 » Download Post

Hi there I have a bog standard mc16 and since I bought it it has had problems accelerating in all gears from below 4000 to 7000. Above 7000 she goes well but when dropping below 6000 she begins to 4 stroke cackling and looses power. I have check plugs and rear is sooty but front is tan. Compression is even at 95 psi on both. I removed and cleaned carbs , twice and now at idle she seems more even ( prior it seemed to be running well on front but hardly firing on rear at idle). I noted rear card had 2qy needle front 2 qz but this appears factory tune to keep rear cylinder cooler? Anyway after clean and setting up as as per guide she is running better at mid revs and top end is good but ,although smaller, there is still a range through which the motor does not run well. I noted the sj and mj are standard .

Also above 7000 once in power band if I ease throttle the bike picks up revs which indicates to me she is running rich but I can live with that but the mid range makes it hairy getting off the mark, is this standard or should the bike pull smoothly from low revs till power band hits ?

Any advice , I live at 350 meters above sea level and often ride up to higher altitude on local rides,
have not ridden at sea level to compare performance. Thanks.
Back to top


Andy
Site Admin
 
Posts: 11950
Joined: 19 Jan 2004

Location: Devon, UK
1991 Honda NSR250 MC21
    Send private message View user's profile
    Reply with quote  

Tue Sep 04, 2012 2:53 pm » Post: #2 » Download Post

Hello "Suretlaw",

Welcome to NSR-WORLD.COM

I'm afraid I do not allow jetting discussion in the public forums. Unfortunately in the past we've had problems with people using settings read on the forum, experiencing problems, and then trying to blame us for their incompetence! Rolling Eyes

Jetting discussion is only allowed in the subscribed Members Area.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.


Check us out on Facebook! Please "like" our page!
Back to top


Reply to topic   printer-friendly view
Page 1 of 1   Download Topic

NSR250R Discussion

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

  • NSR250 Forums Index
  • All times are GMT
Powered by phpBB © 2001, 2005 phpBB Group


Hosted by NSR250dotNET © 2008 NSR250dotNET