HRC Card and Neutral Light

**Mon Jun 06, 2005 4:53 am » Post: #1 » Download Post**

Anyone know if the neutral light is suppose to work with the MC28 / HRC Card wire splice?

After doing the splice, it fires up, turn signals, headlights and horn work but no neutral light. Neutral light definitely works as I have a connector that will allow me to do and undo the splice.

Thanks

rip

**Mon Jun 06, 2005 5:35 am » Post: #2 » Download Post**

Nope, mine doesn't work either, I bought it spliced but from looking at the wiresplice section the fact the neutral, oil and sidestand wires are al supposed to be grounded is probably going to mean the respective warning indicators are all gone.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Mon Jun 06, 2005 10:46 am » Post: #3 » Download Post**

Mine's out too.Sorry.

**Mon Jun 06, 2005 10:48 am » Post: #4 » Download Post**

fontyyy... I love the new signature!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Jun 06, 2005 11:18 am » Post: #5 » Download Post**

Andy wrote:fontyyy... I love the new signature!

Yep, thought I'd cycle through a few of the funny one liners I heard over the weekend, Stephen's "we like people who jet smaller, it shows balls" in response to Jeff's list of mods before his dyno run which was "HRC pipes, modded airbox, smaller jets Shocked

" is probably next.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Mon Jun 06, 2005 9:34 pm » Post: #6 » Download Post**

I run the HRC loom and card and it doesn't show a neutral. Took me such a long time to find neutral last time I used it I've given up. Just park it in gear and hope I remember to pull in the (new) clutch whenever I crank it up.

**Tue Jul 26, 2005 3:02 pm » Post: #7 » Download Post**

I had wirelss splice to match HRC card, but the side stand light is still working, also when i riding on, I felt uncomfortable with, becasue the speed can not up. main jet is 150, cab is open(no air clean box), with HRC 030 card, what can do for the best set up, did I do something wrong?
_________________
1996 HONDA RS250
1995 MC28 NSR250 SE red/white/green
1994 MC28 NSR250 sp W/ RS250 engine