Gauging interest I selling my CA plated NSR. Don't know how to post pics so please help if you can.

Bike needs a new petcock, battery and the endurance headlight mounted and wired. I'm ordering the parts now to get it ready. Bike has a lot of goodies and I'm interested in making a nice package price or I can take off stuff to cater towards a more stock'ish bike.

Basic info- 15000km on odo been garaged since 2006 and motor will be in running form for sale

1992 MC21 SP with 28 swing arm and Delkevic rear. New Michelin pilot power 2ct 160/60
WR rear sets with tyga HRC rear res(new)
Brand new Ohlins rear shock
Tyga subframe, uppers(RSW rs250), lowers, and dzus fasteners and tyga/speedfibre RSW tail
Samco hoses( new)
Frs chambers and Kevlar silencers( formerly JHA RS304 stainless) new and never ran
Etc....
USD 6500'ish with stock R front end and non Magtek wheel. For othe package options please email at Mrk79def1 at y a h o o dot com
I have a nice list of hard to find hard to source HRC goodies for the nice package deal. Email for more parts and info.

Photos on speedzilla and hawkgtforum for members there.

I'm reasonable and flexible so I hope to move this on to a member..hopefully a CA resident

for the pictures you could upload them to a website like photobucket then you could copy the image code on to your post and the image will show up on your ad

saw his bike at speedzilla..nice...pm me for parts you intend to sell off

I'll try that route Plan B. thanks.


As for the guys pm'ing about parts....I'll be in touch thru email. Want to try to sell a package deal first.

Didn't see it on a Hawk forum...

Hey Dmitry,

Didn't post a WTS post. Just have pics on my project post there.

Still trying to post photos here but operator error keeps getting me.

http://s1320.beta.photobucket.com/user/Mrk79def1/library/NSR%20250%201992%20MC21%20SP%20Rothmans%20Edition?


HRC front end and Marchesini not included in base package. Basic R front end with non Magtek wheel will be re-installed for that sale.


Last edited by slowpoke2 on Tue Feb 12, 2013 6:40 am; edited 1 time in total

messaged

Hey guys,
Thanks for the inquiries about spares. Unfortunately I will not be parting until the bike is sold.

I just ordered the remaining parts to get the bike running so it should be online soon. The paint will be freshened up as the upper was dropped during clear coating. So that will be addressed. I will also realign the Honda sticker on the lower to flow better with the upper paint scheme.

I know you never get back what you put into the bike....it's fair to chop all aftermarket prices in half which pretty much what I'm doing. So I decided to create two package prices to give an idea of what I'm after. I purchased the bike in 2006 for $4800 with thrashed stock Rothmans bodywork.

Prices are negotiable as always

$6500 obo MC21 package
Mc28 conversion with Delkevic rear and new mounted Pilot power 2ct
WR rear sets(new) and Tyga HRC reservoir
Samco hoses
Stock adjustable gas cartridge shock
Stock R front end with white non Magtek wheel. (See my garage build in forum for pics)
Tyga RSW upper with NC30 stock headlight( endurance style tunnel)
Tyga RSW lower
Tyga subframe
Tyga/speedfibre RSW 250 tail (cut/mated together as pictured)
Stock chambers and exhaust
Universal style tail light

$10000 obo package includes
All of the above +
Newly refinished HRC RSW 250 upside down forks sprung and valved for 150-160lb rider
Redone by LE suspension to include DLC coating
Rs250 clamps with tyga stem
Marchesini forged magnesium 10 spoke 3.5x17 RS250 wheel( new) with pilot power 2ct
Brembo full floating narrow band style rotors(used)
Brembo calipers and steel braided lines(used)
Brembo MC 19x18 with brembo reservoir and ladybird ti brackets
Sansei 50mm handcuff clip ons
HRC RS250 triple core radiator modded to suit NSR(ugly welds)
Gecko racing pressurized air box(new) never mounted
HRC pj38 carbs(used)
HRC pj38 carb boots(used)
Tyga 300cckit with Wiseco pistons and VHM heads(used from forum member here not mounted)
Marchesini forged magnesium RC30 5.5x17 10 spoke rear wheel.(new)
Ohlins rear shock(mounted but new)
FRS racing chambers and Kevlar silencers(mounted but never started so new) formerly JHA RS 304
Tyga reed cage(new not mounted)
Battle factory stand.
MC21 swingarm
Stock chambers and exhaust
Trashed stock bodywork.(Rothmans)
Ohlins 120mm stroke dampner(new in box)
Sebimoto Kevlar front fender

I know is seems steep but I think do to the rarity of parts the prices are justified. I am a lot more into what The askin price is. So if you feel it's unreasonable then please advise. I know I could make my goal thru parting on forums and ebay...but I'd rather offer it to a forum member looking for a pretty sweet set up. The front end alone is worth more than the purchase price of the bike. CA plated and current reg as well. Located down in San Diego

Like initially mentioned...this is a feeler thread...And I feel like I'll still have NSR in May when I'm hone on R&R.

If nothing happens here it hits a few other avenues then the part out route.

Thanks for viewing guys and gals