Hi, as part of fitting the mc18 loom and pgmII to my mc16, I've been looking as to how they are de-restricted.

Now the wire splice, I'm happy with but the gear position/speed limiting thing Is keeping me in the dark. I dont have the gps on my mc16, so how do I go about fooling the pgm into thinking its in 3rd? Also there is an m-max de-restrictor on the loom but its attacked to the pgm main plug and goes nowhere bar a looped 3-pin spade connector, guessing this is to go to the gps?

What do other racers do with the mc18's loom?

Cheers
Paul
_________________
More **** two strokes than you can shake a **** stick at.

hi paul , there,s no gps on the mc18 , you only need to do the wire splice to de-restrict it

Have you done the wire connection inside the pgm 2 . We got 1.5 hp extra for free !

Mike, cheers for that. Got a bit baffled last night with it!

Neal, how do i go about doing that? Not had my pgm's yet..

Paul
_________________
More **** two strokes than you can shake a **** stick at.

It's not really a derestirction, it advances the timing, if you're setup wants the timing advancing, it'll give a bit of power, if it's on the edge anyway it'll reduce your front piston to a glob of molten ally.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread